Trail Shaft

Tools Needed

  • Ratchet
  • Sockets 8mm, 13mm
  • Loctite

Collapsed:

Extended:

Ends:

Before:

First I Removed The Bolts & Clips I installed on the rear pinon yoke for safe keeping (8mm)

then installed all the bolts on the tcase output yoke and the cv end of the trail shaft (13mm)
i also used Loctite just to be safe.

[u][b]rember to install all the bolts hand tight befor tightening down any of the bolts[/b][/u]

the bolts and clips on the rear pinon yoke (8mm)
i also used Loctite just to be safe.

Done!

Leave a Reply